
Fender and Boat Lines, Pre-Cut and Whipped (2-Pack)
Rigged and ready. Pre-cut, professionally whipped fender lines so your fenders are set the moment you need them: no fraying, no fumbling with knots. Sold as a 2-pack.
Available in 1/2-inch and 3/8-inch diameters, 5 ft and 7 ft lengths, in a range of colors to match your lines.
$11.95
Which diameter and length?Size: 3/8 in x 5 ft
Color: Pacific Blue
30-day money-back guarantee · ships via UPS · secure checkout
- Pre-cut and professionally whipped — no fraying
- Ready-made eye — no knots to tie
- 1/2″ or 3/8″ diameter, in 5 ft and 7 ft
- Sold as a 2-pack, in colors to match your lines
Which diameter and length?
As a general guide, pick the diameter by your boat’s length and the length by how high you tie off above the water.
| Diameter | General guide |
|---|---|
| 3/8 in | Boats up to about 25 ft |
| 1/2 in | Boats from about 25 to 35 ft, or a heavier boat under 25 ft |
| Length | General guide |
|---|---|
| 5 ft | Rails and cleats that sit fairly close to the water |
| 7 ft | Higher rails and cleats, or spare line to reset fender height at fixed docks and with the tide |
- To check the length, measure from where you tie off down to where the fender should sit, then add about 2 ft for the knots.
- Between two sizes, or docking where wind and wakes are rough? Choose the thicker, longer line.
FAQ
Boat fender lines: common questions
01What sizes do the fender lines come in?
Two diameters, 3/8 in and 1/2 in, each in 5 ft and 7 ft lengths. The size guide above this section helps you choose.
02Will the ends of the line fray?
No. Every line is pre-cut and professionally whipped, so the ends do not fray.
03Do I have to tie a knot at the fender?
No. Each line comes with a ready-made eye, so there are no knots to tie at that end.
04How many lines come in a pack, and in what colors?
Fender lines are sold as a 2-pack, in 15 colors so you can match the lines already on your boat.
05Can I hang a fender from the rail without tying a knot?
Yes. Pair your fender line with Quik Fender. It holds the line on the rail, so there are no knots to tie, and one tug locks the fender at the height you set.
Docking guides
Dock with more confidence
- Docking guideSolo docking, step by stepHow to dock a boat alone, step by step: set up fenders and lines, read wind and current, approach slowly, and secure the boat without leaning overboard.Read the guide →
- Docking guideDocking a pontoon or sailboatHow to dock a pontoon boat step by step: wind, fenders, lines, and reaching the cleat from aboard. Plus docking tips for sailboats with high freeboard.Read the guide →
Complete the setup
Everything for a confident docking
Pair it with The Boat Loop®: reach the cleat from the deck, with fenders and lines already set.

