
- 20,000+ sold
The Boat Loop®
Drop the line over the cleat from your deck. No leaning, no jumping.
Customer reviewsThe telescoping docking pole with a fixed loop of nylon-covered stainless steel cable. Reach the cleat, drop the loop, and pull your boat in — both feet planted, never leaning overboard. Four tools in one pole: the loop, a large and small hook, and a push-off stub.
$119.95
Length: Medium (3–6 ft)
Measure from where you stand down to the water. Under 2 ft: Compact. 2 to 4 ft: Medium (most pontoons and runabouts). Over 4 ft: Long. Between two? Go longer.
Color: Yellow
Loop: Standard
30-day money-back guarantee · ships via UPS · secure checkout
- Solo docking without leaning overboard
- Extends your reach to a far cleat, piling, or line
- Loop + large & small hooks + push stub in one pole
- Assembled in USA
Does it hold? Will it scratch?
- Does it actually hold?
- Loop or hook it onto a cleat or piling and it holds firm: a secure grip that draws the boat and dock together without leaning out. Lift it clear to release.
- Will it scratch my boat?
- Soft-touch loop, rubber push stub. It exists to keep hard things off your gelcoat.
- What about durability?
- Heavy-duty fiberglass, built to push and pull for seasons. One rule: never pry. See the care guide.
Compare
Why not just a boat hook?
| Capability | The Boat Loop® | Plain boat hook | Extra crew |
|---|---|---|---|
| Dock solo | ✓yes | —no | —no |
| Dock without leaning out | ✓yes | —no | —no |
| Works on tall pilings | ✓yes | —no | —no |
| Push off without hull damage | ✓yes | —no | ✓yes |
| Always available | ✓yes | ✓yes | —no |
Fiberglass vs aluminum
The Boat Loop® vs the aluminum alternative
The closest alternatives are aluminum Y-frame loop tools. The Boat Loop® is built in a different class: a heavy-duty fiberglass pole, a fixed stainless steel cable loop that stays open, and four tools on one shaft.
| Specification | The Boat Loop® | The aluminum alternative |
|---|---|---|
| Pole material | Heavy-duty fiberglass | Aluminum |
| Loop head | Fixed nylon-covered stainless steel-cable loop; stays open, flexes under a hard pull, bends back into shape by hand | Aluminum Y-frame, no moving parts |
| Corrosion in salt water | Fiberglass shaft won’t corrode | Aluminum |
| Sizing & reach | Three models; extends up to 112″ | Typically one size |
| Tools on the pole | Loop + large hook + line-handling hook + push-off stub | Loop only |
The evidence
Why not just a cheap boat hook?
A telescoping boat hook on Amazon runs $9.99 to $51.99, and independent testers found out why. Practical Sailor put fifteen boat hooks through a hands-on test, and the cheap ones failed in the exact ways you discover at the worst possible moment: mid-dock, one hand on the line, the wind on your bow.
Plastic hooks snap
Testers watched plastic hooks snap, crackle, and pop under a hard pull, the moment you most need one to hold.
Tips bend under load
Metal tips bent when the crew hauled hard on a line, and the hook gave way under energetic pulling.
Pin locks fall out
Telescoping pin locks fell out of position, leaving testers with a collapsed, non-functional pole in the middle of a dock.
Metal joints corrode
Stainless-and-aluminum joints corrode where the two metals meet salt water: the failure you never see coming until it seizes.
Coatings fight the line
Rubber-coated hooks grip the line when you need it to slide free, turning a quick pass into a wrestling match.
Source: Practical Sailor, independent 15-boat-hook test.
A boat hook is built to be inexpensive, light, and basic, and inside that category, it should be. The Boat Loop® is not a better boat hook. It is a docking aid: a different tool for the one job a hook was never built to do safely, pulling your boat in from aboard, without leaning overboard.
Specs
| Pole length | 2–4′, 3–6′, or 4–8′, depending on model |
|---|---|
| Reach (retracted → extended) | MT2-4: 46″→64″ · MT3-6: 58″→88″ · MT4-8: 70″→112″ |
| Weight | ≈2 lb (Compact) up to ≈3.5 lb (loop pack), by model |
| Material | Heavy-duty fiberglass pole; nylon-covered stainless steel cable loop |
| Loop | 19″ tall; fits pilings & posts up to 12″ across |
| Head | Removable 1″ ACME thread; twists off for storage |
| Working load | Do not exceed 100 lb pulling / 75 lb pushing |
| Loop options | Standard, XL, or Loop Pack (Standard + XL); interchangeable loop heads |
How to lock & use
The Extension Pole locks at any length. Confirm it’s locked before applying force.
- 1Set the Extension Pole to the length you need.
- 2Hold Twist Grip 1 in one hand and Twist Grip 2 in the other, and twist them in opposite directions until you feel and hear a distinct click. That click is the pole locking. Twist harder for a firmer lock.
- 3To unlock, twist the two grips in the reverse direction.
Second lock (optional): twisting the Twist Compression Nut on the base pole also locks the Extension Pole.
To dock — To dock, place the loop over the post, piling, or cleat, then pull from the Handle Grip to bring your boat in under control.
Storage — For storage, the head unscrews: grip the Large Hook and Twist Grip 1 and twist in opposite directions.
Safety & warnings
WARNING: Read before use. Improper use of The Boat Loop® can cause injury or death.
- The Boat Loop® is a docking aid only; never use it as a permanent mooring line.
- Never place the loop over or around anyone’s neck. Strangulation could occur.
- The Boat Loop® is not a lifesaving or rescue device. Never use it to pull a person from the water; throw a life ring or other approved throwable flotation device instead.
- Do not exceed 100 lb of pulling force or 75 lb of pushing force. Exceeding these limits can damage the product or cause injury.
- Reduce force when the pole is extended; the fiberglass pole is more susceptible to buckling under heavy pushing at full extension.
- It floats only when the Extension Pole is extended at least 12 inches, so do not rely on it as a flotation device.
Care & maintenance
- Rinse free with fresh water after every saltwater use; salt on the cable, grips, and locks accelerates wear.
- Store out of direct sunlight; prolonged UV exposure degrades the synthetic components.
- Inspect the loop, pole, and both twist locks before each use. Do not use a damaged pole.
- The loop is flexible: a hard pull on a cleat can change its shape. Bend it back into shape by hand before the next use.
FAQ
Using The Boat Loop®
01How do I lock the pole at the length I need?
Set the pole to the length you need, then hold Twist Grip 1 in one hand and Twist Grip 2 in the other and twist them in opposite directions until you feel and hear a distinct click. That click is the pole locking. To unlock, twist the two grips the other way.
02Is there a second lock?
Yes, an optional one. Twisting the Twist Compression Nut on the base pole also locks the Extension Pole.
03How do I take the head off for storage?
The head unscrews on a 1″ ACME thread: grip the Large Hook and Twist Grip 1 and twist them in opposite directions.
04Does The Boat Loop® float?
It floats only when the Extension Pole is extended at least 12 inches, so do not rely on it as a flotation device.
05My loop got bent out of shape. Is it broken?
No. The loop is flexible stainless steel cable, so a hard pull on a cleat can change its shape. Bend it back into shape by hand and keep docking.
06Can I use The Boat Loop® to pull someone out of the water?
No. The Boat Loop® is a docking aid, not a lifesaving or rescue device. It is rated for 100 lb of pull, which is far less than the force needed to pull an adult from the water. If someone goes overboard, throw a life ring or other approved throwable flotation device. Use the pole only to retrieve gear.
Featured reviews
What 20,000 boaters figured out
A selection of 4- and 5-star reviews written by customers here on rsmarine.com.
★★★★★
Has really helped making docking easier in a very tight slip
Robert Klein ·
Reviewed on rsmarine.com
★★★★★
The poles are great for docking, especially hooking dock cleats or posts. Pole would be even better if loops could be removable and just leave the hook end as loop gets in way when you don't need it.
Donald Mitzel ·
Reviewed on rsmarine.com
★★★★★
Helps to get my boat to dock
Deb M ·
Reviewed on rsmarine.com
★★★★★
Helps to get my boat to dock
Deb M ·
Reviewed on rsmarine.com
★★★★★
Like having another dock hand
Douglas Gemmill ·
Reviewed on rsmarine.com
Docking guides
Dock with more confidence
- Size guideBoat Loop® size guidePick the right Boat Loop® for your boat: compare the MT2-4, MT3-6, and MT4-8 by reach and freeboard, and choose a Standard loop, XL loop, or Loop Pack.Read the guide →
- Docking guideSolo docking, step by stepHow to dock a boat alone, step by step: set up fenders and lines, read wind and current, approach slowly, and secure the boat without leaning overboard.Read the guide →
- Buying guideDocking pole vs boat hookDocking pole vs boat hook: what each tool does, when a plain boat hook is enough, when a loop-style docking pole fits better, and what to look for in either.Read the guide →
- Docking guideDocking a pontoon or sailboatHow to dock a pontoon boat step by step: wind, fenders, lines, and reaching the cleat from aboard. Plus docking tips for sailboats with high freeboard.Read the guide →
Complete the setup
Everything for a confident docking
Pair The Boat Loop® with the kit, fenders, and lines built to work alongside it.

